Automated prediction system of household energy consumption in cities using web crawler and optimized artificial intelligence

The supply of electrical energy is critical to convenient and comfortable living. However, people consume a large amount of energy, contributing to an energy crisis and global warming, and damaging some ecological cycles. Residential electricity consumption has greater elasticity than industrial and business consumption; it therefore has high energy-saving potential. This work establishes an automated platform, which provides information about residential electricity consumption in each city in Taiwan. Machine learning was used to forecast future residential electricity demand. A nature-inspired optimization method was applied to enhance the accuracy of the best machine learner, yielding an even better hybrid ensemble model. Performance measures indicate that the resulting model is accurate and provides effective information for reference. An automatic web-based system based on the model was combined with a web crawler and scheduled to run automatically to provide information on monthly residential electricity consumption in each county and city. By providing energy consumption information across the country, power providers and government can discuss policy and set different goals for energy use. The results of this study can facilitate the early implementation of energy-saving and carbon emission-reducing in cities and aid utility companies in establishing energy conservation guidelines.     

Unraveling specific role of carbon matrix over Pd/quasi-Ce-MOF facilitating toluene enhanced degradation

Metal organic frameworks (MOFs) derivatives represented by quasi-MOFs have excellent physical and chemical properties and can be applied for the catalytic combustion of volatile organic compounds (VOCs). In this work, Pd/quasi-Ce-BTC synthesized by simple one-step N₂ pyrolysis was applied to the oxidation of toluene, showing excellent toluene catalytic activity (T₉₀ = 175 °C, 30000 mL/(g·h)). Microscopic analyses indicate the formation and interaction of a carbon matrix composite quasi-MOF structure interface. The results show that the amorphous carbon matrix formed during the partial pyrolysis of Ce-BTC significantly improves the adsorption and activation capacity of toluene in the reaction, and constructs a reductive system to maintain high concentrations of Ce³⁺ and Pd⁰, which can facilitate the activation and utilization of oxygen in reaction. Quasi in-situ XPS proves that carbon matrix is indirectly involved in the activation and storage of oxygen, and Pd⁰ is the crucial active site for the activation of oxygen. Stability and water resistance tests display good stability of Pd/quasi-Ce-BTC. This work provides a potential method for designing quasi-MOF catalysts towards VOCs effective abatement.     

The thermochromic characteristics of Zn-doped VO2 that were prepared by the hydrothermal and post-annealing process and their polyurethane composite films

In this paper, Zn-doped VO₂ nanoparticles have been successfully fabricated by a two-step hydrothermal-annealing process, and the thermally induced visible light transmittance enhancement of Zn-doped VO₂ has been studied for the first time. It is found that Zn-doped VO₂ not only exhibits excellent solar modulation ability (ΔT_sol = 15.27%) but also can reduce the phase transition temperature and increase the visible light transmittance after the heat-induced phase transition (ΔT_lum=+5.78%). Moreover, with the increase of Zn doping concentration, the phase transition temperature (T_c) and phase transition hysteresis (ΔT) both decrease. It is shown that the Zn-doped VO₂-PU films not only have good solar light modulation ability and properties of improving visible light transmission after phase transition, but also have good durability. The research result is of great significance for improving the visible light transmittance after phase transition and realizing the practical application of VO₂ in the field of smart windows.     

Oil Demand and Stocks

Current data of world oil demand. This includes international bunkers and refinery fuel. Updated on a monthly basis. Current data of oil demand from counties such as Canada, the United States of America, Japan, OECD Europe, Belgium, France, Germany, Italy, Netherlands, Spain, Sweden, the United Kingdom, Australia, Mexico, Republic of Korea, and Turkey. Updated on a monthly basis. Current data for crude oil and refined product stocks in Canada, Chile, Mexico, the United States (Western Hemisphere), France, Germany, Italy, Netherlands, Spain, the United Kingdom and Other Europe (Europe), Japan, Republic of Korea, Other Pacific (Asia‐Pacific), and Total OECD (Table 12.1) Current data for refined product stocks in the OECD Western Hemisphere, OECD Europe, OECD Asia‐Pacific and Total OECD. Products include gasoline, diesel and gasoil, and heavy fuel oil. Updated on a monthly basis (Table 12.2).     

以 提高实践能力为目标的数据结构课程教学改革探索

This paper analyzes the problems existing in the teaching of data structure course, and puts forward the reform from the as- pects of strengthening basic programming, visualized explanation of abstract theory, combination of C++, Java programming, ratio- nal use of online platform, and stratification of exercises, aiming at improving students' practical ability, learning interest and self- confidence.     

臭氧氧化-循环喷淋法处理钨钼选矿废水

采用臭氧氧化-循环喷淋法去除钨钼选矿废水中COD,研究了pH值、臭氧流量、循环频率对COD去除效果的影响。结果表明: 废水COD去除率随pH值、臭氧流量、循环频率增大而增加,在pH值为10、臭氧流量3.0 L/min、循环频率4.0次/min条件下,氧化120 min后废水COD含量由131 mg/L降至11.5 mg/L,COD去除率达91.2%,满足《污水综合排放标准》(GB 8978-1996)一级标准。与O₂、NaClO处理废水COD的对比试验结果表明,循环喷淋法结合O₃表现出较好的COD去除效果。     

Tunable Spectrum Selectivity for Multiphoton Absorption with Enhanced Visible Light Trapping in ZnO Nanorods

Observation of visible light trapping in zinc oxide (ZnO) nanorods (NRs) correlated to the optical and photoelectrochemical properties is reported. In this study, ZnO NR diameter and c‐axis length respond primarily at two different regions, UV and visible light, respectively. ZnO NR diameter exhibits UV absorption where large ZnO NR diameter area increases light absorption ability leading to high efficient electron–hole pair separation. On the other hand, ZnO NR c‐axis length has a dominant effect in visible light resulting from a multiphoton absorption mechanism due to light reflection and trapping behavior in the free space between adjacent ZnO NRs. Furthermore, oxygen vacancies and defects in ZnO NRs are associated with the broad visible emission band of different energy levels also highlighting the possibility of the multiphoton absorption mechanism. It is demonstrated that the minimum average of ZnO NR c‐axis length must satisfy the linear regression model of Z _p,min = 6.31d to initiate the multiphoton absorption mechanism under visible light. This work indicates the broadening of absorption spectrum from UV to visible light region by incorporating a controllable diameter and c‐axis length on vertically aligned ZnO NRs, which is important in optimizing the design and functionality of electronic devices based on light absorption mechanism.     

Ex post demand information sharing between differentiated suppliers and a common retailer

We consider ex post demand information sharing in a two-echelon supply chain in which two suppliers sell differentiated products through a common retailer. We model three scenarios of information sharing to characterise the conditions under which information sharing may benefit or hurt different players: (1) no supplier is informed; (2) only one supplier is informed; and (3) both suppliers are informed. We find that the retailer may voluntarily share the low demand information when the product differentiation and demand magnitude satisfy certain conditions. In contrast, the retailer has no incentive to share the high demand information, even though this information benefits the suppliers. To achieve information sharing, we propose a side payment mechanism, which allows benefitted players to subsidise hurtful players. Finally, we extend our model by considering a situation where the suppliers have limited capacity and may invest to ramp up production capacity to satisfy a high demand.     

Effect of cerium oxide prepared under different hydrothermal time on electrocatalytic performance of Pt-based anode catalysts

In this paper,CeO_2 with a pore size of 2-4 nm was synthesized by hydrothermal method.The CeO_2 modified graphene-supported Pt catalyst was prepared by the microwave-assisted ethylene glycol reduction chloroplatinic acid method,and the effect of the addition of CeO_2 prepared by different hydrothermal reaction time on the catalytic performance of Pt-based catalysts was investigated.The microstructures of CeO_2 and catalysts were characterized by X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),specific surface area and pore size analyzer(BET),scanning electron microscopy(SEM) and electron spectroscopy(EDAX),transmission electron microscopy(TEM),and the catalysts electrochemical performance was tested by electrochemical workstation.The results show that the catalytic performance of the four catalysts with CeO_2 is better than that of the catalyst without CeO_2.Adding CeO_2 with a specific surface area of 120.15 m~2/g prepared by hydrothermal reaction time of 39 h to Pt/C synthesis catalyst,its electrocatalytic performance,stability and resistance to poisoning are the best.The electrochemical active surface area is 102.83 m~2/g,the peak current density of ethanol oxidation is 757.17 A/g and steady-state current density of 1100 s is 108.17 A/g which shows the lowest activation energy for ethanol oxidation reaction.When the cyclic voltammogram is scanned for 500 cycles,the oxidation peak current density retention rate is 87.74%.